Data of superficial area and volume of fractured specimen from Characteristics of hydraulic fracture surface based on 3Dscanning technology Fan Zhang Geng Ma Yunqi Tao Xiao Liu Yixin Liu Rui Li 10.6084/m9.figshare.6466013.v1 https://rs.figshare.com/articles/dataset/Data_of_superficial_area_and_volume_of_fractured_specimen_from_Characteristics_of_hydraulic_fracture_surface_based_on_3Dscanning_technology/6466013 The surface characteristics of fractured specimens are important in hydraulic fracturing laboratory experiments. In this paper, we present a three-dimensional (3D) scanning device assembled to study these surface characteristics. Cube-shaped rock specimens were produced in the laboratory and subjected to triaxial loading until the specimen split in two in a hydraulic fracturing experiment. Each fractured specimen was placed on a rotating platform and scanned to produce 3D superficial coordinates of the surface of the fractured specimen. The scanned data were processed to produce high-precision digital images of the fractured model, a surface contour map and accurate values of the superficial area and specimen volume. The images produced by processing the 3D scanner data provided detailed information on the morphology of the fractured surface and mechanism of fracture propagation. High-precision 3D mapping of the fractured surfaces is essential for quantitative analysis of fractured specimens. The 3D scanning technology presented here is an important tool for the study of fracture characteristics in hydraulic fracturing experiments. 2018-06-09 04:41:58 surface characteristic hydraulic fracturing 3D scanning 3D coordinates superficial area